Single Post

Hello, I am Tony Forleo, A 30-Year-Old Award-Winning Angel Investor And An Optimistic Individual With The Dream Of Being An Inspiration For All.

Flywheel prone to problems and solutions

1. Crushing operation can not be carried out, the flywheel is still rotating but the jaw crusher can not run normally for crushing operation
Cause of failure:

The moving jaw body tie rod device of the jaw crusher is damaged, causing the elbow plate to lose its supporting role. When the tie rod spring fails, the elbow plate falls off the tie rod support block or the elbow plate breaks due to large load. At this time, the discharge size cannot be adjusted.

Solution:

Pay attention to check the operation of elbow plate and related parts and adjust them in time. When the elbow plate breaks, replace it in time.

2. Abnormal swing of flywheel
Cause of failure:

In the long working process, if the material rolls into the inner side of the wheel, the flywheel wheel shell cracks, the flywheel slot hole, the belt pulley, the flywheel key, the bearing wears, resulting in the loosening of the relevant parts of the important parts.

Solutions:
  1. Increase flywheel and groove wheel shield
  2. Immediately stop the machine to repair the wear of the pulley, flywheel, flywheel key and bearing and replace them in time.

In addition, before starting the jaw crusher and after the crushing work, the operator should do a good job of cleaning the machine, pay attention to the inspection of the flywheel and deal with the problems in time to ensure the normal operation of the equipment.

Facebook
Twitter
LinkedIn
Digg

了解 hotonmach 的更多信息

立即订阅以继续阅读并访问完整档案。

Continue reading