With the update of sand making equipment technology, the quality of the mechanism sand is fully comparable with the natural sand, and the supply is stable, so in the shortage of natural sand today, the mechanism sand instead of natural sand is more than suitable. This article takes 150 tons per hour mechanism sand production line configuration scheme as an example, and introduces the difference between fixed and mobile version of the production line, so that you can purchase reference!
1. Fixed type mechanism sand production line
Configuration: vibrating feeder, PE750×1060 jaw crusher, HXGYS400 cone crusher, HXVSI1140 vertical impact crusher, 4YK2460 vibrating screen, conveyor, etc.
From the above configuration, it can be seen that the fixed production line is more fragmented in its composition, which is connected together with the help of conveyors to form a complete production line of mechanism sand. Therefore, the fixed production line requires a larger site and requires infrastructure, piling, etc. to fix the equipment to the corresponding location according to the designed production line. There is also the fact that it occupies a large area and is usually installed outdoors, so it needs to be provided with a power supply device to ensure that it can operate normally; there is also the fact that it requires relatively more labor, after all, the equipment is more scattered and requires a little more labor, but it has a large and stable output, and more importantly, the cost is not high! So this is also the reason why most customers choose it.
2. Mobile mechanism sand production line
Configuration: Mobile jaw crusher + mobile impact crusher or mobile cone crusher + mobile vertical impact crusher
The mobile production line is not restricted by the environment, there is no complicated foundation construction, mechanical installation and other links in the early stage, and it can be produced after factory commissioning, while the whole vehicle adopts PLC control device, intelligent operation can also effectively improve the output, and reduce the staff operating the equipment, fully liberating the manpower. But there is one thing, its high price, limited production, the audience is mainly some sites are not fixed to relocate the operation of the gravel plant boss.
To sum up, if your quarry is very big and needs a large processing capacity without moving, it is recommended to choose a stationary crusher. On the contrary, it is better to choose mobile production line. Of course there are exceptions, the specific program according to the user production site environment, crushing material characteristics, production output needs, capital budget, etc. to design, you need to consult online to understand the relevant mechanism sand production program configuration issues.
